Dwyer Series 2000 Magnehelic® Differential Pressure Gauge
Select the Series 2000 Magnehelic® Gauge for a versatile low differential pressure gauge with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gauge movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
-20 in Hg. to 15 psig.†(-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.
20 to 140°F (-6.67 to 60°C). -20°F (-28°C) with low temperature option.
4" (101.6 mm) diameter dial face.
Diaphragm in vertical position.
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws.
Meets the technical requirements of EU Directive 2011/65/EU (RoHS II). Note: -SP models not RoHS approved.
Sign up for our newsletter
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.